The Best Trailer Size for Carrying 2 ATVs


Are you planning to hit the road and need a trailer that can carry two ATVs? If that is the case, you have arrived at the right spot to learn how to choose the right trailer size for 2 ATVs.

The best trailer size for carrying 2 ATVs is 12 feet long and 6 feet wide. This trailer size fits 2 ATVs and leaves enough room for safety. If you have four-wheelers that are bigger than the average ATV, then you will need a trailer size of 14 to 16 feet.

Whether you’re a weekend warrior or a seasoned rider, this guide will help you make an informed decision, ensuring your ATVs arrive safely and securely at your destination.

How Heavy & Wide are ATVs?

a trailer with 2 atvs

When it comes to ATVs, their weight and width can vary quite a bit, depending on the make and model. On average, a standard ATV weighs somewhere between 400 to 800 pounds. However, it’s not uncommon to find larger models, especially those designed for more rugged terrain or utility purposes, tipping the scales at over 1,000 pounds.

As for the width, most ATVs are designed to be trail-friendly, which means they typically measure around 45 to 50 inches wide. This size is ideal for navigating through most trails and paths, but it’s always a good idea to check the specific dimensions of your ATV, as this can influence your choice of trailer.

What is the Best Trailer Size for Carrying 2 ATVs

Generally, a trailer that’s at least 12 feet long and 6 feet wide should do the trick. This size provides enough room to fit two average-sized ATVs side by side without them being too cramped. However, if your ATVs are larger than average, you might need a trailer that’s a bit longer, perhaps in the 14 to 16 feet range. It’s also crucial to ensure that the trailer’s weight capacity is sufficient to handle the combined weight of both ATVs. A tandem axle trailer is often recommended for two ATVs, as it provides better stability and weight distribution.

Another factor to consider is the loading and unloading process. A trailer with a built-in ramp can make this process much easier. Additionally, the layout of the trailer can affect how you position your ATVs. Some trailers are designed to carry ATVs in a side-by-side configuration, while others may require you to load them in a tandem arrangement (one behind the other). The choice between these configurations will depend on the specific dimensions of your ATVs and your personal preference for loading. You can read more about how to load ATVs intro truck beds.

I took the top 3most popular ATVs models and ran the math on how big of a trailer size you need to carry two of them. Here is the full breakdown:

  1. Polaris Sportsman 450 H.O.: This model typically measures about 83 inches in length and 48 inches in width, with a weight of around 700 pounds. To transport two of these ATVs, a trailer size of 12 feet long by 6 feet wide would be suitable, allowing enough space for side-by-side placement.
  2. Yamaha Grizzly EPS: The Yamaha Grizzly EPS is known for its robust build. It typically measures about 81.5 inches in length and 48.8 inches in width, with a weight of approximately 700 pounds. Given these dimensions, transporting two of these ATVs would require a trailer that’s at least 12 to 14 feet long and 6 to 7 feet wide. This size ensures that both ATVs can be placed side by side with enough room to prevent any damage during transit.
  3. Can-Am Outlander MAX 570: The Can-Am Outlander MAX 570 is a larger model, often used for more demanding tasks. It measures around 94 inches in length and 48 inches in width, and weighs about 800 pounds. To transport two of these, you’d be looking at a trailer size of at least 16 feet in length and 7 feet in width. The extra length is crucial here to accommodate the extended length of each ATV.

Are There Trailers That Can Carry 4 ATVs?

trailer carrying 4 ATVs

What if you’re planning a group adventure and need to transport four ATVs? You’re in luck because there are trailers designed for this very purpose. A trailer measuring around 18 to 20 feet in length should be sufficient to accommodate four ATVs. These larger trailers often come with additional features like built-in ramps and tie-down points, making loading and unloading a breeze. Remember, with a bigger trailer, you’ll need a vehicle capable of towing the extra weight.

How To Secure ATVs in Trailers

Securing your ATVs properly in a trailer is crucial for safe transportation. Here’s a breakdown of key tips and tricks to ensure your ATVs are stable and secure during transit:

  • Use Quality Straps: Choose high-quality, durable straps for securing your ATVs. It’s essential that the straps are rated for the weight of your ATV. Attach the straps to solid points on the ATV, such as the frame or designated tie-down points, avoiding weaker parts like plastic guards or racks.
  • Balanced Distribution: Distribute the weight of the ATVs evenly on the trailer. Place the ATVs in a way that doesn’t overload one side of the trailer. This helps in maintaining the balance and stability of the trailer while on the move.
  • Tighten Straps Correctly: Tighten the straps firmly to prevent any movement of the ATVs. However, be cautious not to over-tighten as this could damage the ATV’s suspension or body. Cross the straps over the ATV for added stability, preventing forward or backward movement during stops and starts.
  • Regular Checks: Regularly check the tension of the straps during long trips. Vibrations from the road can sometimes loosen straps, so it’s important to ensure they remain tight and secure throughout the journey.
  • Use Wheel Chocks: Place wheel chocks in front of and behind the ATV’s tires for extra stability. This prevents the ATVs from rolling and putting additional strain on the straps.
  • Cover for Protection: If you’re going on a long trip, consider using a cover for your ATVs. This helps protect them from road debris and adverse weather conditions.
  • Locking Mechanisms: Utilize locking mechanisms or additional security devices, especially for overnight stops or when leaving the trailer unattended. This adds an extra layer of security against theft or tampering.

By incorporating these practices, you can ensure that your ATVs are securely fastened and protected during transportation. Remember, regular maintenance of your straps and trailer components is key to ensuring ongoing safety and reliability.

Wrapping It Up

And there you have it! Choosing the right trailer for your ATVs doesn’t have to be a headache. Remember, the key is knowing the size and weight of your ATVs and matching them with a trailer that fits these specifications. Whether you’re carrying two or four ATVs, there’s a trailer out there that’s perfect for your needs. Secure them well, and you’re all set for an exciting adventure.

Bob Kelly

Hey there, my name is Bob and I've been riding ATVs, dirt bikes, and UTVs for most of my life. Going on outdoor adventures has always been my passion. I love sharing tips and tricks with beginners who are getting ready to join the world of outdoor enthusiasts. You can reach me at bobtheatvguy@gmail.com if you want to get in touch.

Recent Posts